Fibers, Colors, and Admixtures
The benefits of combining fibers, color, and/or admixtures with concrete is nearly infinite. Most concrete mixes use some type of admixture in their concrete in order to achieve desired properties required for their project.
Fibers can increase impact resistance, and in some cases, replace steel reinforcement. Admixtures can accelerate and delay setting time, minimize shrinkage or permeability, make waterproof, increase workability at a given water content, or enhance strength, pumpability, and finishability.
We are happy to assist you with choosing the best concrete product, admixture, fiber, and/or color for your project. Please send your information through the button below and our sales department will contact you with recommendations.
FIBERS
MASTERFIBER® MAC 360 FF
Synthetic Hybrid Fiber with Optimum Finishing Performance
MasterFiber MAC 360 FF, a synthetic hybrid fiber, is manufactured from a proprietary blend of polypropylene resins for use in making fiber reinforced concrete in compliance with the requirements of ASTM C 1116/C 1116M “Standard Specification for Fiber- Reinforced Concrete.”
MASTERFIBER™ F70
Fibrillated Microsynthetic Fiber
MasterFiber F70, a micro synthetic fiber, is a fibrillated polypropylene fiber manufactured from 100% virgin homopolymer polypropylene resins. MasterFiber F70 meets the requirements of ASTM C 1116/C 1116M, Section 4.1.3, Type III, and Note 2 and the requirements of ICC ES AC32 Sections 3.1.1 (plastic shrinkage reinforcement) and 3.1.2 (shrinkage and temperature reinforcement). MasterFiber F70 is designed to distribute quickly throughout the concrete mixture. The fibrillation pattern is designed to optimize the mechanical bond between the mortar matrix and the fiber. MasterFiber F70 is an excellent shrinkage and temperature (secondary) reinforcement option when used at 1.5 lb/yd3 (0.9 kg/m3).
MASTERFIBER® M 70
Monofilament Microsynthetic Fiber
MasterFiber M 70 product is a monofilament polypropylene fiber manufactured from 100% virgin homopolymer polypropylene resins. MasterFiber M 70 product meets the requirements of ASTM C 1116/C 1116M, Section 4.1.3, Type III, and Note 2 and the requirements of ICC ES AC32 Section 3.1.1 (plastic shrinkage reinforcement). MasterFiber M 70 product disperses well in the concrete matrix and visible evidence of a superior finishability makes it a good candidate for all residential applications.
MASTERFIBER M 100
Monofilament Microsynthetic Fiber
MasterFiber M 100 product is a high-tensile strength, high modulus of elasticity, ultra-thin monofilament homopolymer polypropylene fiber designed to quickly distribute uniformly throughout the concrete matrix. At the engineered dosage level of 0.50lb/yd3 (0.3 kg/m3) MasterFiber M 100 product outperforms all other plastic shrinkage fiber reinforcements at their typical dosage of 1.0lb/yd3 (0.6 kg/m3).
COLORED CONCRETE
INTERSTAR
NSTAR NON-REACTIVE
STAIN FOR CONCRETE
Interstar’s NStar Non-Reactive Stains safely and easily turn plain concrete into eye-catching works of art.
SCOFIELD SYSTEMS
CHROMIX® ADMIXTURES FOR
COLOR-CONDITIONED® CONCRETE
Add strength and beauty to both vertical and horizontal construction projects with CHROMIX Admixtures. The reliable, non-fading and consistent coloring admixtures for cast-in-place and precast concrete have been proven to stand the test of time.
ADMIXTURES
MasterMatrix® UW 450
Anti-Washout Admixture
MasterMatrix UW 450 anti-washout admixture is a patented, ready-to-use, liquid cellulose-based admixture that is specially developed for underwater concrete applications. Concrete containing MasterMatrix UW 450 admixture exhibits superior resistance to washout of cement and fines, while impeding the blending of external water into the plastic concrete. Not recommended for air-entrained concrete. MasterMatrix UW 450 admixture meets the requirements of the U.S. Army Corps of Engineers CRD-C 661-06, Specification for Anti-Washout Admixtures for Concrete.
MasterAir® AE 200
Air-Entraining Admixture
MasterAir AE 200 air-entraining admixture provides concrete with extra protection by creating air bubbles that are ultrastable, small and closely spaced – a characteristic especially useful in the types of concrete known for their difficulty to entrain and maintain the air content desired. Even when used at a lower dosage than standard air-entraining admixtures, MasterAir AE 200 admixture meets the requirements of ASTM C 260, AASHTO M 154, and CRD-C 13.
MasterCell® 25
Admixture for Controlled Low Strength Materials (CLSM)
Formerly Rheocell Rheofill*
MasterCell 25 admixture is a ready-to-use, self-contained product for use in various flowable fill applications where reduced densities (unit weights) and air contents of up to 35% are desired.V
MasterCell® 30
Foaming Agent for Controlled Low Strength Materials (CLSM)
Formerly Rheocell 30*
MasterCell 30 admixture meets the requirements of ASTM C 869, “Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete.”
MasterGlenium® 7500
Full-Range Water-Reducing Admixture
Formerly GLENIUM 7500*
MasterGlenium 7500 full range water-reducing admixture is very effective in producing concrete mixtures with different levels of workability including applications that require self-consolidating concrete (SCC). MasterGlenium 7500 admixture meets ASTM C 494/C 494M compliance requirements for Type A, water-reducing, and Type F, high-range water-reducing, admixtures.
MasterGlenium® 7620
Full-Range Water-Reducing Admixture
MasterGlenium 7620 ready-to-use full-range water-reducing admixture incorporates state-of-the-art molecular engineering to provide rapid dispersion of powder materials, thereby minimizing mixing time and improving production efficiency. MasterGlenium 7620 admixture is formulated to meet ASTM C 494 requirements for Type A, water-reducing, and Type F, high-range water-reducing, admixtures.
MasterLife® SF 100
Densified Silica Fume AdmixtureFormerly Rheomac SF 100*
MasterLife SF 100 dry, densified silica fume admixture is formulated to produce extremely strong, durable concrete. MasterLife SF 100 silica fume admixture meets the requirements of ASTM C 1240, Standard Specification for Silica Fume used in Cementious Mixtures.
MasterLife® 300D
Crystalline Capillary Waterproofing Admixture
MasterLife 300D admixture is an integral crystalline capillary waterproofing admixture for concrete. It is designed for use in above- and below-grade applications. MasterLife 300D admixture meets ASTM C 494/C 494M requirements for Type S, Specific Performance, admixtures. A red-pigmented version of MasterLife 300D admixture is also available.
MasterLife® CI 30
Corrosion-Inhibiting Admixture
Formerly Rheocrete CNI*
MasterLife CI 30 calcium nitrite based corrosion inhibiting admixture is used for reinforced concrete. MasterLife CI 30 admixture contains a minimum of 30% active ingredients by mass and meets ASTM C 494/C 494M requirements for Type C, accelerating admixtures.
MasterLife® CRA 007
Crack-Reducing Admixture
MasterLife CRA 007 crack reducing admixture is an innovative liquid chemical admixture that is specifically formulated to reduce the magnitude of drying shrinkage and minimize the potential for cracking. Compared to a shrinkage reducing admixture, MasterLife CRA 007 crack reducing admixture provides enhanced performance through (i) significant reduction in the potential for shrinkage cracking, and (ii) reduced initial crack widths if cracking does occur. MasterLife CRA 007 admixture meets ASTM C 494/C 494M, Standard Specification for Chemical Admixtures for Concrete, requirements for Type S, Specific Performance Admixtures.
MasterLife® SRA 035
Shrinkage-Reducing Admixture
MasterLife SRA 035 shrinkage-reducing admixture was developed specifically to reduce drying shrinkage of concrete and mortar, and the potential for subsequent cracking. MasterLife SRA 035 admixture functions by reducing capillary tension o f pore water, a primary cause of drying shrinkage. MasterLife SRA 035 admixture will meet ASTM C 494/C 494M requirements for Type S, Specific Performance, admixtures.
MasterPel® 200HD
Water-Repellent and Efflorescence Control Admixture for High-Density Applications
Formerly Rheopel 200HD*
MasterPel 200HD multipurpose admixture is specially formulated and designed for water-repellent and efflorescence control in the high-density applications such as concrete paving stone productions. This unique formula is based on a novel silane chemistry that is different from the conventional water repellent admixtures in the manufactured concrete product industry. MasterPel 200HD admixture imparts excellent wind driven rain resistance, and masonry units treated with MasterPel 200HD admixture have achieved the highest rating per ASTM E 514.
MasterPolyheed® 1025
Mid-Range Water-Reducing Admixture
Formerly PolyHeed 1025*
MasterPolyheed 1025 admixture is a patent pending ready-to-use midrange water-reducing admixture. MasterPolyheed 1025 admixture, based on MasterGlenium® technology, is very effective in producing concrete with different levels of workability and enhanced finishing characteristics. MasterPolyheed 1025 admixture meets ASTM C 494/C 494M requirements for Type A, water-reducing, and Type F, high-range water-reducing, admixtures.
MasterPozzolith® 700
Water-Reducing Admixture
Formerly Pozzolith 700N*
MasterPozzolith 700 ready to- use, liquid admixture is used for making more uniform and predictable quality concrete. It is formulated to meet ASTM C 494/C 494M requirements for Type A, water-reducing, Type B, retarding, and Type D, water-reducing and retarding, admixtures.
MasterSet® AC 534
Accelerating Admixture
Formerly Pozzolith NC 534*
MasterSet AC 534 patented, ready-to use, liquid admixture is formulated to accelerate time of setting and to increase early concrete strengths. MasterSet AC 534 admixture does not contain calcium chloride and is formulated to comply with ASTM C 494/C 494M Type C, accelerating, admixture requirements.
MasterSet® DELVO
Hydration Controlling Admixture
Formerly DELVO Stabilizer*
MasterSet DELVO ready-to- use, liquid admixture is used for making more uniform and predictable high-performance concrete. MasterSet DELVO admixture retards setting time by controlling the hydration of portland cement and other cementitious materials while facilitating placing and finishing operations. MasterSet DELVO admixture meets ASTM C 494/C 494M requirements for Type B, retarding, and Type D, water-reducing and retarding, admixtures.
MasterSet® FP 20
Accelerating Admixture
Formerly Pozzutec 20+*
MasterSet FP 20 admixture is a multi-component, non chloride, water-reducing and accelerating admixture formulated to accelerate concrete setting time and increase early and ultimate strengths across a wide range of ambient temperatures (hot, mild, cold and subfreezing). MasterSet FP 20 admixture meets ASTM C 494/C 494M requirements for Type C, accelerating, and Type E, water-reducing and accelerating, admixtures.
MasterSet® R 100
Set Retarding Admixture
Formerly Pozzolith 100 XR*
MasterSet R 100 ready to- use liquid admixture is used for producing more uniform and predictable quality concrete. Placing and finishing requirements are facilitated because this admixture retards setting time. MasterSet R 100 admixture meets ASTM C 494/C 494M requirements for Type B, retarding, and Type D, water-reducing and retarding, admixtures.
MasterSure® 1390
Air-Detraining Admixture for Concrete
Formerly PS 1390*
MasterSure 1390 air-detraining admixture is a patented liquid admixture formulated for use in concrete. MasterSure 1390 admixture facilitates a reduction in entrapped and, where applicable, entrained air content during mixing.
MasterSure 1390 admixture meets ASTM C 494/C 494M requirements for Type S, Specific Performance, admixtures.
MasterSure® Z 60
Workability-Retaining Admixture
Formerly RheoTEC Z-60*
MasterSure Z 60 admixture is a workability-retaining admixture that provides flexible degrees of slump retention without retardation. MasterSure Z 60 admixture provides concrete producers a cost-effective means of maintaining consistency between loads of concrete with respect to slump, workability, and air content. MasterSure Z 60 admixture meets ASTM C 494/C 494M requirements for Type S, Specific Performance, admixtures.
XYPEX C-500/C-500 NF
Concrete Waterproofing
Xypex is a unique chemical treatment for the waterproofing, protection and improvement of concrete. XYPEX ADMIX C-500/C-500 NF is added to the concrete mix at the time of batching and consists of Portland cement, silica sand (excluding the NF grade,) and various active, proprietary chemicals that react with the moisture in fresh concrete and with the by products of cement hydration to cause a catalytic reaction.
Krystol Internal Membrane™ (KIM®)
Concrete Waterproofing
Krystol Internal Membrane (KIM) is a hydrophilic crystalline admixture in dry powder form. KIM is used in place of externally applied surface membranes to protect concrete structures against moisture transmission, chemical attack and corrosion of reinforcing steel.